Izifudumezi zeMibhobho yeRabha yeSilicone

Inkcazo emfutshane:

Iisifudumezi somgca wokukhupha amanziinezibonelelo zoyilo olupheleleyo olungangeni manzi, ukugquma kabini, njl.njl., Kwaye ubude kunye namandla entambo yokufudumeza zinokwenziwa ngokwezifiso ngokweemfuno zabathengi ukuze kuhlangatyezwane nokusetyenziswa kweendawo ezahlukeneyo. Ukongeza, ngenxa yokuthamba kwezinto ze-silicone, kulula ukuyifaka kwaye inefuthe elihle lokunyibilikisa.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazo yeheater yomgca wokukhupha amanzi

Umsebenzi ophambili weizifudumezi zomgca wokukhupha amanzikukuba emva kokuba i-chiller isebenze ixesha elithile, i-wind blade yefeni iya kubanda, kwaye ucingo lokufudumeza oluthintela ukuqandisa luya kunyibilika, ukuze amanzi anyibilikisiweyo angabandakanywa kwindawo yokugcina amanzi abandayo ngombhobho wokukhupha amanzi.
Ekubeni isiphelo esingaphambili sombhobho wokukhupha amanzi sifakwe kwindawo yokugcina amanzi ebandayo, amanzi anyibilikisayo adla ngokuba ngumkhenkce ngenxa yendawo engaphantsi kwe-0C, nto leyo evala umbhobho wokukhupha amanzi, ngoko ke kuyimfuneko ukufaka ucingo olushushu ukuqinisekisa ukuba ukunyibilikisa amanzi akuqini kumbhobho wokukhupha amanzi.isifudumezi sombhobho wokukhupha amanzikwipayipi yokukhupha amanzi, uze ufudumale umbhobho ngelixa unyibilikisa ukuze amanzi aphume kakuhle.

Idatha yeenkcukacha ze-drain heater

Ukufudumeza umzimba		I-NiCr okanye i-Cu-Ni Alloy		Ubude/M	40W/M	50W/M
Isiphelo somsila womzimba wokufudumeza		Vala umsila wesiphelo se-colloidal silica		0.5M	20W	25W
Umphezulu ophezulu weTem		200℃		1M	40W	50W
Ubuncinci bomphezulu		-60℃		1.5M	60W	75W
I-Voltage	110-240V	Imilo	Umyinge we-7*5mm	2M	80W	100W
Amandla	±5%	Amandla okukhupha	40-50W	3M	120W	150W
Ubude bomzimba weteyipu	±5%	Ukumelana nobushushu	≥200MN	4M	160W	200W
Ukunyamezelana	± 10%	Umsinga ovuzayo	≤0.2MA	5M	200W	250W

Ingxelo:

1. Amandla: amandla aqhelekileyo yi-40W/M kunye ne-50W/M, amanye amandla nawo angenziwa ngokwezifiso, njenge-30W/M;

2. Ubude bomhla wobomi beteyiphu: 0.5-20M bunokwenziwa ngokwezifiso, ubude abunakuba ngaphezulu kwe-20M;

3. Musa ukusika intambo yokufudumeza ukuze unciphise ubude bomsila wokupholisa.

* Ngokubanzi, ucingo lokufudumeza lombhobho wokukhupha amanzi oluyi-50W/M luqhelekile. Xa lusetyenziswa kumbhobho wokukhupha amanzi weplastiki, sicebisa intambo yokufudumeza yombhobho wokukhupha amanzi enamandla okukhupha angama-40W/M.

Uphawu lwentambo yokufudumeza yombhobho

1. Ukumelana nobushushu obuhle:Ukusetyenziswa ngokubanzi kwerabha ye-silicone njengezinto ezikrwada, imeko yokusebenza yi--60℃-200℃;

2. Ukuqhuba kakuhle kobushushu:Amandla anokuvelisa ubushushu, ukuhanjiswa kobushushu ngokuthe ngqo, ukusebenza kakuhle kobushushu, anokufudunyezwa ngexesha elifutshane ukuze kufezekiswe umphumo;

3. Ukusebenza kombane okuthembekileyo:intambo nganye yokufudumeza yombhobho ivavanywa ngokuntywiliselwa koxinzelelo oluphezulu kunye nokumelana nobushushu xa uphuma kwifektri, ukuqinisekiswa komgangatho;

4. Ulwakhiwo oluqinileyo:ukuguquguquka okuphezulu, kulula ukugoba, kudityaniswe nesiphelo esibandayo ngokubanzi, akukho ndawo yokubopha, ulwakhiwo olufanelekileyo, kulula ukuyifaka;

5. Uyilo oluqinileyo:ubude bokufudumeza, ubude bomgca we-lead kunye namandla e-voltage zingenziwa ngokwezifiso.

Isicelo

Inkqubo yeMveliso

Ngaphambi kokuba ubuze, sicela usithumelele iinkcukacha ezingezantsi:

1. Ukusithumelela umzobo okanye umfanekiso wokwenyani;
2. Ubungakanani beheater, amandla kunye nevolthi;
3. Naziphi na iimfuno ezikhethekileyo zeheater.